uPVC Window Repairs
Adding value to your home with uPVC repairs is a great idea. They are also cost effective and can be quickly repaired when something goes wrong.
Misted windows are a sign that the seal on the double glazing has broken down and it requires replacement. This is a cheaper alternative than replacing the entire window.
Glass that has cracked
If a chip or crack occurs in your window glass, it's not always necessary to replace the entire glass. Window repairs made using Upvc can typically be used to repair the damage. This is due to the fact that uPVC (Un-plasticized Polyvinyl Chloride) windows are designed to last and easy to maintain.
Use masking tape or duct tape to cover both sides of a damaged glass pane. This is an inexpensive and quick method of stopping the crack from spreading. It also keeps out rain, bugs and wind.
Epoxy resin is another way to repair a cracked glass. This method is more time-consuming, but will also make your window look like new. Mix the epoxy as per the instructions on the package. You'll typically need a 50/50 mixture of resin and hardener. You'll need to be quick because the mixture will begin to thicken and harden very fast.
Once you've mixed the epoxy and applied it to the crack in your window glass. Apply it to the crack using a putty knife. Once the crack is sufficiently filled with epoxy, soak a rag in acetone to wipe off any excess resin. Allow the epoxy to dry for 24 hours before you remove the rag. Do the same for any other areas.
A more permanent solution is to replace your broken glass with tempered glass which has been tempered to be more durable than standard glass. This type of glass is more safe than standard glass because it breaks into smaller chunks of granular material instead of sharp, jagged fragments. This will also help to reduce drafts in your home and lower your energy bills. If you've got very serious or large cracks in your glass, however, it may be required to replace the entire window instead of repairing the cracks. This may require the services of a professional window fitter. They can evaluate your glass and advise you on the most suitable replacement options.
Stiff Window Mechanism
Over time, uPVC window can become stiff and difficult to open or close. This will not only cause a draft but also hinder the window from locking properly. This can be easily fixed by a upvc window repair specialist who will ensure your uPVC window can be restored to full functionality.
UPVC Windows in the UK are very popular due to their low cost as well as their high security and insulation properties. However, like all types of materials, they will degrade over time due wear and tear. In certain instances this could be the hinge becoming stiffer or a problem with the handle or locking mechanism. These issues can be addressed quickly with upvc window repairs and are a cheaper option than replacing the entire window.
The most common problem with uPVC Windows is an unresponsive or jammed operating arm. The gearbox inside the window's handle could break, causing shoot bolts and the roller cams to jam or seize in the open position. It's also possible a lug is damaged and will not allow the operating arm to move from a closed position to the open position.
It is important to clean regularly the moving parts on uPVC windows, especially in the winter months when they are exposed to harsh elements. This will prevent corrosion and other issues that could arise in the future. Regularly lubricating exposed metal parts is also necessary to improve the performance and longevity of a uPVC window. Light engineering oil is a great lubricant (available in aerosol containers to make it easy).
It is best to contact a professional if you are worried that your uPVC windows are becoming stiff. They'll have the tools and expertise to fix the issue in a safe manner. They can also check whether there is a different reason for the issue, such as an unintentional leak in the gasket or frame.
It is also advisable not to slam your UPVC window as this can damage the uPVC and result in a weak seal and increased energy bills. Use a window cleaner instead to clean any salt or grit from the window's uPVC frame where the lugs that move for multipoint locks are located.
Soft Gasket
Upvc windows are extremely durable and require minimal maintenance, but occasionally, they will require a bit of TLC to ensure they are running smoothly. Whistling draughts from your window can be caused by many different factors that include:
The first thing you will have to do is clean the part around the seal using soap and water and make sure you clean any areas in which there are cracks or damage. After the area is completely clean, use some clear sealant to fill the gap and apply it with the caulking gun. Make sure to smooth the sealant so that it is uniform and doesn't have any gaps.
Let the sealant dry completely before using your window for the second time. To ensure that the window is working correctly, you'll need to open and close it many times. If you find that the window is still leaky or is not sealing properly, then it could be necessary to get professional help.
Fogging up a window can cause damage, leading to discomfort and higher energy costs. One of the ways to address this issue is to get it defogged by spraying an aqueous solution in the gap to eliminate the fogginess. This is not an indefinite fix, and the draughts will likely come back, but it can stop the window from leaking for a short amount of time.
There are also some DIY kits available that let you defog your own window but reviews are mixed and they can be very messy if they are not used correctly. It is better to hire a professional company to complete this process. They'll be familiar with all the equipment required and techniques. It will save you time and effort, and will ensure that the work will last for a lengthy period of time.
Frame Damaged
Modern uPVC frames are extremely strong and resistant to bad weather. If your windows are damaged or poorly installed, they can lead to problems like draughts and leaks. They may even split into two pieces. It is essential to get the window repaired immediately if you notice this. This will stop any further damage to your home and any health issues that may be caused by the broken or leaky frame.
There are a few things that you can do to avoid calling for help from a professional for upvc window repairs, including:
Ensure you're uPVC windows are regularly cleaned. You can use a soft cloth soaked in warm water and liquid soap and pay particular attention to the corners where dirt typically builds up. Use a white towel to keep dyes that are absorbed by the fabric from staining the uPVC. You can also employ a solvent-based cleaner to get rid of stubborn stains if the uPVC has become extremely dirty. It is important to know that these chemicals are dangerous when used improperly. Always read the directions before applying.
Making sure that all moving parts of your uPVC window lubricated will improve their performance and reduce the chances that they will become stuck or damaged by rust. WD-40 is usually the best choice for this because it's safe to use on most uPVC and is available from many hardware stores. Also, make sure that the drain holes aren't blocked as this can lead to moisture build-up around the windows and cause damage to the frame.
If RepairMyWindowsAndDoors have started to appear yellow, this is due to exposure to sunlight over time. This is a natural occurrence and there's nothing you can do to stop it, but if you notice that your uPVC is looking a bit less than it should, you might want to think about replacing them with energy efficient double-glazed glass units. This will reduce the cost of energy and make your home appear more attractive.